Allied Insulation (india)
Ram Nagar, Ghaziabad, Uttar Pradesh
GST No. 09ACOPJ6569M1ZN
08048263340 83% Response Rate
Send E-mail
- Home
- »
- Our Product Range
- »
- Thermal Insulation Products
Thermal insulationis the reduction ofheat transfer(i.e., the transfer ofthermal energybetween objects of differing temperature) between objects in thermal contact or in range of radiative influence. Thermal insulation can be achieved with specially engineered methods or processes, as well as with suitable object shapes and materials.
Heat flow is an inevitable consequence of contact between objects of differenttemperature. Thermal insulation provides a region of insulation in whichthermal conductionis reduced orthermal radiationis reflected rather than absorbed by the lower-temperature body.
The insulating capability of a material is measured as the inverse ofthermal conductivity (k). Low thermal conductivity is equivalent to high insulating capability (Resistance value). Inthermal engineering, other important properties of insulating materials are productdensity (ρ)andspecific heat capacity
Types of Thermal insulaion material
LOOSE WHITE GLASS WOOL
FIBER GLASS WOOL
MINERAL WOOL
SLAG WOOL
ROCKWOOL
RB SLABS
LRB MATTRESS
RESIN BONDED MATTRESS
LIGHT RESIN BONDED MATRESS
NITRILE RUBBER NSULATION
NBR INSULATION SHEETS
ETC
| Thickness | 20-40 mm |
| Color | Blue |
| Size | AS PER CUSTOMER REQUIREMENT |
| Shape | RECTANGLE |
| Is It Water Resistant | Water Resistant |
| Density | 34 kg/m3 |
| Brand | Insuboard |
| Compressive strength | 180-350 kPa |
| Water Absorption | 0.3% |
xps board is used in cavity walls and is good product for insulation
xps boards are used for insulating roofs walls etc. Also known as over deck insulation boards and foam insulation boards.
reduces unwanted heat flow
xps baords plays important role in green buildings
| Minimum Order Quantity | 240 Square Meter |
| Packaging Type | Vaccume packed Rolls |
| Shape | Rolls |
| Material | Fiber Glass |
| Moisture Rate | Less Then 5% |
| Density | 12-48 kg/m3 |
| Length | 1200-2400 mm |
| Thickness | 25-150 mm |
| Width | 600-1200 mm |
| Thermal conductibility | 0.034-0.06 |
Soundproofing solutions for just about everything! Our soundproofing and acoustic insulation products Fiber Glass Wool offer homeowners affordable sound insulation from the common problem of domestic noise pollution and noisy neighbours. Without adequate acoustic insulation or soundproofing many people have their privacy constantly invaded by noisy neighbours. This soundproofing problem can occur in any type of attached house, but most commonly:-
In flats converted from large houses where no attempt has been made to provide soundproofing.
Where the sound or acoustic insulation in their building is poor. People are bothered by their neighbours for a number of reasons, but the most common reasons are
They are unusually sensitive to noise
Their noisy neighbour behaves unreasonably We provide expert advice on domestic sound proofing issues for flat conversions & offices. We sell all the materials necessary for all the solutions with the sole aim of making your home & work place a more peaceful place.
Specifications:
- Product range : Density 12 Kg/Cubic m to 100 Kg/Cubic m and thickness 12mm to 100mm
- Temperature Range : Fibre glass insulation is suitable for applications ranging from minus 195 degree celsius to plus 230 degree celsius. For special applications upto 450 degree celsius, high temperature binder
| Minimum Order Quantity | 2000 Square Meter |
| Usage/Application | Roof Insulation |
| Material | Aluminum foil |
| Packaging Type | Roll |
| Thickness | 4mm to 20mm |
| Length | 40 M |
| Width | 1-1.5 M |
Bubble Insulation reflects heat and almost 97 percent of radiant heat rays to keep the inner atmosphere at stable temperature. Such thermal resistant bubble insulation material is actually single or multi layer polyethylene air bubbles film coated with aluminum foil or fibers from single or both of the side. The layers of air bubbles are sandwiched between pure and reflective aluminum material. It gives higher strength to the polyethylene film and also the resistance against the punctures and tears. Such thermal roof insulation material is versatile in use as it can be used to covers the roofs, ceilings, crawl spaces, wall and attics and even utilize for packaging purposes. Such radiant barrier film is also used for mobile house insulation. Large scale steel building and concrete structure can also be insulated with multi layer bubble insulation by pre engineered building insulation. One of the greatest advantages of using thermal resistance polyethylene air bubble insulation is that it can be used again and again as far as it remains in comparatively sustainable shape. Application of polyethylene bubble insulation includes similar to fiberglass application and such material can be used in both hot and cold climates. HVAC ducts, steel structure, garage openings, basement walls and radiant roof can be covered with such insulation material.
*Your information is safe with us.
| Minimum Order Quantity | 200 Bag |
| Packaging Size | 25 kg |
| Packaging Type | Bag,Packet |
| Size | 25 kg bags |
| Brand | ALLIED |
| Shape | Loose |
| Color | White |
| Max Temperature Resistance | 0-200 degree Celsius |
| Thermal Conductivity | 0.035 w/mk |
| Usage/Application | insulation |
| Material | Glass Fiber |
| Dry Density | 38-80 Kg/m3 |
| Bond strength | Less Then 1.7 kpa |
The use of Glass wool for the thermal insulation of external walls and ceiling has been shown to reduce energy consumption by 20% to 30%. Glass wool is manufactured from widely available and renewable raw materials and provides environmental benefits in terms of resource saving and energy saving in every stage from pre manufacturing to end use.
used in Boilers , ovens , Geysers , chimneys , silencers etc
also known as loose Glass wool or insulation wool
| State/Form | Liquid |
| Packaging Size (ex. 1L or 1Kg) | 20 Ltr |
| Color | Black |
| Shelf Life | 12 Months |
| Usage/Application | Industrial |
| Flash Point | 40 Degree C |
| Service Temperature | -10 - 75 Degree C |
| Batch no. | G170851 |
| Minimum Order Quantity | 50 Meter |
| Usage/Application | ROOF INSULATION,SHED INSULATION |
| Thickness | 6mm to 50mm |
| Brand | Supreme |
| Color | Grey |
| Material | Polyethylene |
| Density In Kg Cubic-Meter | 33/ CU MTR |
| Density | 34 kg/m3 |
A versatile range of extruded, closed-cell, Supreme XLPE Foam Insulation.
Protecxlc is a range of extruded, closed cell, Supreme XLPE Foam Insulation. The product can be offered in various densities, thickness & laminates options in standard roll forms or sheet forms or in customized cut pieces. Supreme XLPE Foam Insulation is suitable for various industrial applications that require high performance foam in roll form.
Features :
Applications :